Изображение служит только для ознакомления, перед покупкой уточняйте точные характеристики в технической документации!
General Driver board for Robots, Based on ESP32, multi-functional, supports WIFI, Bluetooth and ESP-
УТ003266480
Нет отзывов
General Driver board for Robots, Based on ESP32, multi-functional, supports WIFI, Bluetooth and ESP-

General Driver board for Robots, Based on ESP32, multi-functional, supports WIFI, Bluetooth and ESP-

  • Производитель: Waveshare Electronics
  • Под заказ
  • Самовывоз через 6-8 недель
  • Отправка возможна 9 июля
Минимальный заказ от 1 шт
Кратность заказа 1 шт
3 785,69
General Driver board for Robots, Based on ESP32, multi-functional, supports WIFI, Bluetooth and ESP-
General Driver board for Robots, Based on ESP32, multi-functional, supports WIFI, Bluetooth and ESP-
General Driver board for Robots, Based on ESP32, multi-functional, supports WIFI, Bluetooth and ESP-
General Driver board for Robots, Based on ESP32, multi-functional, supports WIFI, Bluetooth and ESP-
General Driver board for Robots, Based on ESP32, multi-functional, supports WIFI, Bluetooth and ESP-
General Driver board for Robots, Based on ESP32, multi-functional, supports WIFI, Bluetooth and ESP-
General Driver board for Robots, Based on ESP32, multi-functional, supports WIFI, Bluetooth and ESP-
General Driver board for Robots, Based on ESP32, multi-functional, supports WIFI, Bluetooth and ESP-
Доставка курьером по Москве (в пределах МКАД)

Ориентировочная стоимость (Время доставки и итоговая стоимость согласуются индивидуально с каждым клиентом):

Товар весом до 10 кг - 500 ₽

Товар весом свыше 10 кг - 800 ₽

Доставка в любой регион РФ почтой России и транспортными компаниями: СДЭК, 5POST, Boxberry, Деловые линии, DPD.

Стоимость доставки зависит от города назначения и размера посылки. Вы можете самостоятельно рассчитать стоимость доставки на сайтах транспортных компаний.

Самовывоз по адресу г. Москва Варшавское ш., д.26, стр. 10

Выдача товара производится согласно графика работы:

Пн-Чт: с 9:00 до 18:00

Пт: с 9:00 до 17:00

Обед с 13:00 до 14:00 - выдача товара не производится.


Оплата только безналичным способом!
Мы не работаем с наличным расчетом

Вы можете оплатить заказ следующими способами:

  • Онлайн оплата банковской картой (Visa, MasterCard, МИР, Union Pay) через процессинговый центр ПАО «Сбербанк».
  • Через систему быстрых платежей (СБП) по QR-коду.
  • Через агрегаторов платежных систем Ю-касса или LifePay.
  • В личном кабинете «Сбербанк Онлайн» в разделе «Переводы и платежи», «Перевод организации».
  • Лично в отделении банка при предъявлении распечатанного счета.
General Driver board for Robots, Based on ESP32, multi-functional, supports WIFI, Bluetooth and ESP-NOW communications, Compatible with Raspberry Pi and Jetson Nano
General Driver for Robots

Multi-functional driver board designed for robots, offering more possibilities

Features at a glance
  • Based on the ESP32-WROOM-32 module, supports wireless communication such as WIFI, Bluetooth and ESP-NOW
  • Onboard motor control interfaces for 2x DC motor with encoder or 4x DC motor (2 groups) without encoder
  • Onboard serial bus servos control interfaces for controlling up to 253 ST3215 serial bus servos and obtaining servos feedback
  • Onboard 9-axis IMU to obtain attitude and heading information at any time
  • Supports 7~13V power input, and can be powered directly by 2S or 3S lithium battery module
  • Automatic download circuit for easy uploading programs
  • Support input voltage/current monitoring
  • Onboard TF card slot
  • Onboard Laser Lidar interface and integrated UART to USB function
  • I2C interface for connecting peripherals such as OLED, IMU, and other I2C devices
  • Adapting Multi-functional extended header for additional functions, such as controlling servos or relays
  • Onboard 40PIN GPIO header for connecting and powering the host computer (Raspberry Pi/Jetson Nano, etc), communicating via serial port or I2C
  • Provides open-source demos and detailed tutorials for beginners, easy to get started
Specifications
control moduleESP32-WROOM-32Control chipESP32
Power supplyDC 7~13VPower interfaceXH2.54
Antenna connectorIPEX1Download interfaceType-C
Wireless communicationWIFI, Bluetooth, ESP-NOWDimensions65 × 65mm
mounting hole spacing49 × 58mmMounting hole diameter3mm
Rich Peripheral interfaces Suitable for different types of robots
ESP32 Main Controller Rich Resources for secondary development

Built-in WiFi and Bluetooth, as well as ESP-NOW support, for wireless communication

Support multiple Peripheral connections
40PIN GPIO extended header

The inner side 40PIN header is for directly connecting to the Raspberry Pi or other host boards. And extend the outer side 40PIN header for connecting with other HATs via cables

Serial Bus Servo Control

Allows controlling up to 253 ST3215 serial bus servos at the same time

Note: One channel UART can control up to 253 bus servos, but due to the high power of the servos, it is necessary to consider whether the power supply solution is enough when using too many servos.
Voltage and current monitoring

Onboard voltage/current monitoring chip to obtain the power supply status of the robot at any time

Onboard 9-axis IMU

Onboard QMI8658C + AK09918, for detecting movement, orientation, and magnetic Support Obtaining the heading angle of the robot anytime and anywhere

What's On Board
  1. ESP32-WROOM-32 controller moduleCan be developed using Arduino IDE
  2. IPEX1 WIFI connector For connecting WIFI antenna to increase the wireless communication distance
  3. LIDAR interface Integrated radar adapter function
  4. I2C peripheral expansion interfaceFor connecting with OLED screen or other I2C sensors
  5. Reset Button Press and release to reboot the ESP32
  6. Download button The ESP32 will enter the download mode after powering on
  7. DC-DC 5V voltage regulator circuitPower supply for host computers such as Raspberry Pi or Jetson nano
  8. Type-C port (LADAR)LIDAR data transmission
  9. Type-C port (USB) ESP32 communication interface, for uploading programs to ESP32
  10. XH2.54 power port Support DC 7~13V input, can directly power the serial bus servos and motors
  11. INA219voltage/current monitoring chip
  12. Power ON/OFF External power supply ON/OFF
  13. ST3215 serial bus servo interface For connecting with ST3215 serial bus servo
  14. Motor interface PH2.0 6PGroup B interface for motor with encoder
  1. Motor interface PH2.0 6PGroup A interface for motor with encoder
  2. Motor interface PH2.0 2P Group A interface for motor without encoder
  3. Motor interface PH2.0 2P Group B interface for motor without encoder
  4. AK09918C3-axis electronic compass
  5. QMI8658C 6-axis motion sensor
  6. TB6612FNG Motor Control Chip
  7. Serial bus servo control circuitfor controlling multiple ST3215 serial bus servos and obtaining servos feedback
  8. TF card slotCan be used to store logs or WIFI configurations
  9. 40PIN GPIO header For connecting with Raspberry Pi or other host boards
  10. 40PIN extended header Easy to use the GPIO pins of Raspberry Pi or other host boards
  11. CP-2102UART to USB, for radar data transmission
  12. CP-2102 UART to USB, for ESP32 communication
  13. Automatic download circuit For Uploading programs to the ESP32 without pressing the EN and BOOT buttons
Provides open-source demos and detailed tutorials
Product Show
Outline dimensions
Resources & Services

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

Комплект поставки

  1. General Driver for Robots x1
  2. Screws pack x1
1
2
Производитель
Waveshare Electronics
Основная группа
Комплектующие для робототехники
Нет отзывов
Ваша оценка
Введите свои данные
Оставляя комментарий, Вы соглашаетесь на обработку персональных данных

Популярные товары

Хит
ATC
Доставка в течение 1 дня
5 864,43 ₽
Хит
Доставка в течение 1 дня
6 470,47 ₽
Хит
Товар дня
Доставка в течение 1 дня
399 ₽
Хит
Доставка в течение 1 дня
1 499 ₽
Хит
Распродажа
Доставка в течение 1 дня
33 033 ₽
Хит
Доставка в течение 1 дня
от 7 530,23 ₽

Вы недавно смотрели

3 785,69 ₽
Выберете количество